Produtos da Marca Dell

Back to Contents Page

 Rear Stand Cover

Dell™Inspiron™One2205ServiceManual

Removing the Rear Stand Cover

Replacing the Rear Stand Cover



Removing the Rear Stand Cover



1. Follow the instructions in Before You Begin.



2. Remove the back cover (see Removing the Back Cover).



3. Follow the instructions from step 3 to step 7 in Removing the Front Stand.



4. Lift and hold the rear stand so that the rear stand cover can be released from its position.



5. Slide out the rear stand cover through the rear stand.

Replacing the Rear Stand Cover



1. Follow the instructions in Before You Begin.



2. Lift and hold the rear stand and slide the rear stand cover through the rear stand.



3. Place the rear stand cover in its position.



4. Follow the instructions from step 4 to step 7 in Replacing the Front Stand.



5. Replace the back cover (see Replacing the Back Cover).



6. Connect your computer and all attached devices to electrical outlets, and turn them on.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

rear stand cover

rear stand

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.