Back to Contents Page
Memory
Dell™Inspiron™535s/537s/545s/546sServiceManual
Removing Memory
Replacing Memory
Recommended Memory Configuration
Setting Up Dual Channel Memory Configuration
Removing Memory
1. Follow the procedures in Before You Begin.
2. Remove the computer cover (see Removing the Computer Cover).
3. Locate the memory modules on the system board (see System Board Components).
4. Press out the securing clip at each end of the memory module connector.
5. Grasp the memory module and pull it upwards.
If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from the connector.
Replacing Memory
1. Follow the procedures in Before You Begin.
2. Press out the securing clip at each end of the memory module connector.
3. Follow the memory installation guidelines (see Recommended Memory Configuration).
4. Align the notch on the bottom of the memory module with the tab in the memory module connector.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)
removed.