Produtos da Marca Dell

9. Route the USB cable through the cable routing clip.



10. Replace the computer cover (see Replacing the Computer Cover).

CD/DVD Drive



Removing a CD/DVD Drive



1. Follow the procedures in Before You Begin.



2. Remove the computer cover (see Removing the Computer Cover).



3. Disconnect the power cable from the back of the drive and the CD/DVD drive cable from the back of the drive and the system board.



4. Slide the drive release mechanism to the right to release the shoulder screw and slide the drive out to remove it from the drive bay.



Installing a CD/DVD Drive

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

NOTE: If removing or installing the drive changes the drive configuration, you must reflect the changes in the BIOS. Go to the "Drives" section of the

BIOS and under SATA 0 through 5, set the SATA ports to the correct configuration.

CD/DVD drive cable

power cable

system board

sliding plate

CD drive