Produtos da Marca Dell

Back to Contents Page

 Removing and Installing Parts

Dell™Dimension™4700CServiceManual

Reattaching the Front Door

Topreventdamagetoyourcomputer,thefrontdoorisdesignedto"breakaway"ifitisopenedtoofar.Toreattachthefrontdoor:



1. Shut down the computer through the Start menu.



2. Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut

down your computer, turn them off now.



3. Disconnect any telephone or telecommunication lines from the computer.



4. Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.



5. Move the hinge arms to the closed position.



6. Align the two clips on the inside of the front door with the two hinge arms.



7. Press inward on the front door until it clips to both hinge arms.

Memory

You can increase your computer memory by installing memory modules on the system board.

Your computer supports DDR2 memory. For additional information on the type of memory supported by your computer, see the memory specifications.



DDR2 Memory Overview

Reattaching the Front Door

Memory

Cards

Flash Card Reader

Processor

Modem

Power Supply

System Board

Battery

Closing the Computer Cover

NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.

NOTE: The top hinge arm clicks when it is moved to the closed position—thebottomhingearmdoesnot.