31
To retrieve an automatically parked call:
• Dial 10 plus the number that was announced. If you have a PAGPK key, press it
and dial the number that was announced. If you have a PARK key, press it and
dial the announced orbit number.
• You will be connected to the parked call.
NOTES:
1. If the call is not retrieved within a pre-programmed period of time, it will recall
your keyset and have a slow amber light. You cannot park and page intercom
calls.
2. If the Hot Keypad feature has been turned off, you must first lift the handset or
press SPK before you begin dialing.
SETTING A MESSAGE INDICATION
When you are calling another station and no one answers or you receive a busy
signal, you can leave a message indication:
• Press the MSG key or dial 43 and receive confirmation tone.
• Hang up. The MSG key on the called station will light. Standard telephones
receive special dial tone as a message indication or a lit message lamp, if the
phone is equipped with one and they are connected to a 16MWSLI card on the
system.
NOTES:
1. A station can have up to five message indications.
2. If the Hot Keypad feature has been turned off, you must first lift the handset or
press SPK before you begin dialing.
CANCELING MESSAGES
To cancel a message indication that you left at another station, dial 42 plus the
extension number of the station at which you left a message.
To cancel all message indications left at your keyset, dial 42 plus your extension.
Your MSG light will go out.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press SPK before you begin dialing.
500_DCS_Screen.qxp 12/2/2005 9:43 AM Page 37
RETURNING MESSAGES
• Press the MSG key or dial 43.The first station that left a message will be called
automatically. If that station does not answer, your MSG light will stay on.
• Repeat until all messages have been returned in the order received.
• Your MSG light will turn off when all messages have been returned.
NOTES:
1. Display keyset users can view message indications and return them in any
order. S
ee Viewing Message Indications under Display Features.
2. If the Hot Keypad feature has been turned off, you must first lift the handset or
press SPK or the MONITOR key if you are using a 7B phone before you begin
dialing.
3. If a message has been left at your keyset by a keyset in Auto Answer, you must
manually cancel the message after it has been returned.
PROGRAMMED MESSAGES
When you will be away from your phone for any length of time, you can leave a
programmed station message. Display stations calling you will see this message
and be informed of your status or follow your instructions.
• Dial 48 plus any message code (01-20) listed on the back of this user guide.
• To cancel any of these messages you might have selected, dial 48 plus 00.
• Press TRSF to exit and store your selection.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press SPK before you begin dialing.
You can have multiple programmed message keys (PMSG) and each one can have
a different message code:
• Press any programmed message (PMSG) button. The message is set and the
button will light red. Press the button again to turn off.
• Pressing another programmed message (PMSG) button will turn the previous
one off and set a different programmed message.
32
500_DCS_Screen.qxp 12/2/2005 9:43 AM Page 38
