2
Adjusting the Media Tray
Loosen the Adjustment Knobs on the Side of the Media Tray. The tray should be adjusted so that the
edge of the tray is below the throat (output) of the cutter. When the tray is adjusted correctly tighten
the Adjustment Knobs.
The Media Tray can also be adjusted to the length of labels being cut. Loosen the bottom Adjustment
Knob, (under the tray) and move the Media Guide to accommodate your cut label size, then tighten
the Adjustment Knob. The Media Tray can stack up to 2 inches of labels with a label length of 2
inches to 6.25 inches long.
