iDP-460 User’s Manual
48 CITIZEN
FS P-200,40ch
[Name] Execute P-250 Mode
[Code] <1C>H
[Function] This command resets all the attributes, clears the print buffer, and set the
right margin to 42. A subsequent command and printer operation will be of the
P-250 mode.
[Caution] If this command is received halfway printing, the data and attributes so far
will be deleted. If this command is set in the P-250 mode, it will be ignored.
[Initial Value] The P-200 mode is effectuated immediately after power-on.
[See Also] GS
GS P-250,42ch
[Name] Execute P-200 Mode
[Code] <1D>H
[Function] This command resets all the attributes, clears the print buffer, and set the
right margin to 40. A subsequent command and printer operation will be of the
P-200 mode.
[Caution] If this command is received halfway printing, the data and attributes so far
will be deleted. If this command is set in the P-200 mode, it will be ignored.
[Initial Value] The P-200 mode is effectuated immediately after power-on.
[See Also] FS
