necessary to move the temperature setting for cold or
hot vehicles. The system automatically adjusts the
temperature, mode and fan speed to provide comfort
as quickly as possible.
•
In cold weather, the fan will not turn on in Auto mode
until the engine coolant has warmed up sufficiently.
This is indicated by the “WARM UP DELAY” message
on the display.
•
The temperature can be displayed in U.S. or Metric by
selecting the U.S./METRIC Customer-Programmable
feature. Refer to 9Overhead Console Customer-
Programmable Features9 in Section 3. The mode will
also be shown in the display and will change as
required during automatic operation.
•
The system can be put into recirculate mode without
affectingATC operation. This will temporarily prevent
outside air from entering the vehicle. Use this mode to
block out any outside odors, smoke, or dust.
Manual Control (ATC)
You may also choose to customize your comfort by
selecting the fan speed and mode manually. Turning the
fan speed knob or any mode button places the system
into manual operation.
While in manual operation there are six fan speeds
available and the choice of any mode. The airflow
temperature is adjusted automatically to maintain the
desired comfort level. You can adjust the temperature by
pressing the + or - Temp rocker switches.
FAN Control
Use this knob to regulate the amount of air delivered
through the system in any mode you select. Rotation
of the knob to increase (clockwise) or decrease (counter-
clockwise) fan speed.
34 INSTRUMENT PANEL AND CONTROLS
