timing belt pulled side, when the timing belt is pressed down approx. 5 mm by hand, the force
required is: 19.6 - 29.4 N (2.0 - 3.0 kg), and its schematic diagram is shown below;
16. Check and Maintenance of Engine Accessaries’ Belts
Wedge belt: Check its tension, and regulate or replace it if necessar. Refer to the “Timing belt” for
the requirement on tension after regulating;
17. Check and Adjustment of Clutch
Check whether the travel of clutch pedal is proper. If not, regulate the clutch control cable under the
transmission to adjust the travel of pedal. The regulating position is shown in the figure below:
The regulating method.: The clutch control cable regulating nut is a lock nut. In case of
regulating, push outwards the control cable to make the regulating nut have a proper clearance away
from the clutch separation arm. In this case, the travel of clutch can be adjusted only. Turn the nut in
the clockwise direction to reduce the free travel; and turn the nut in the anticlockwise direction to
increase the free travel.
18. Check and Maintenance of Brake System
18.1. Brake master cylinder and vacuum booster with brake master cylinder
Check the brake fluid level, and check the leakage of brake master cylinder and vacuum booster
Regulate this nut
