• Disconnect the halogen bulb by turning it counter-clockwise.
• Separate the halogen bulb where it joins to the wire harness.
• Connect the LUX H8 bulb by lining up the inner tabs as shown below.
• Insert the new LUX H8 into the headlight, reversing the steps to remove the old bulb.
You will need to twist it clockwise until it locks into place with the orange grommet
providing a firm seal. You will also need to tuck the wiring and black box into the
headlight housing. There is plenty of room for a nice comfortable fit.
• A simple way to make sure that the LUX H8 bulb is lined up properly is to look through
the front headlight from the front of the car rather than from the back of the headlight. If
you look from the front of the headlight as you insert the LUX H8 bulb, you will be able
to see the bulb being inserted so that it lines up with the three grooves where the H8
bulb is to be mounted in the headlight. Once you have it lined up, push in and turn in a
clockwise direction. You will see it lock into place as shown in the picture below.
Metal Clip
Halogen Bulb
