Rev. 1.08
[Name] NV image output
[Type] ASCII FS p n m
HEX 1C 70 n m
DECIMAL 28 112 n m
[Range] 1 n 255, 0 m 3 , 48 m 51
[Description] NV image is printed in various sizes depending on the value of m.
n is the NV image number defined by using FS q command.
m defines the image mode.
FS q n [xL xH yL yH d1 …dk]1…[xL xH yL yH d1…dk]n
[Name] To define NV image
[Type] ASCII FS q n [xL xH yL yH d1 …dk]1…[xL xH yL yH d1…dk]n
HEX 1C 71 n [xL xH yL yH d1 …dk]1…[xL xH yL yH d1…dk]n
DECIMAL 28 113 n [xL xH yL yH d1 …dk]1…[xL xH yL yH d1…dk]n
[Range] 1 n 255, 0 nL 255, 0 d 255
0 xH 3 3 (when 1
xL+xH
256
1023)
0 yL 1 (when 1
yL+yH
256
288)
k = (xL+xH
256)
(yL+yH
256)
8
Total defined data area = 1M bits(128K bytes)
[Description] The value of n is used to define the NV image. The value n is the defined
NV image number.
- xL and xH are used to set the NV image to (xL + xH(256))x8 dots in
horizontal direction.
- yL and yH are used to set the NV image to (yL + yH(256))x8 dots in
vertical direction.
[Name] To select the character size
[Type] ASCII GS ! n
HEX 1D 21 n
DECIMAL 29 33 n
[Range] 0 ≤ n ≤ 255
(1≤Vertical number of times≤8, 1≤Horizontal number of times≤8)
[Description] Bits 0 to 2 are used to select the height of the characters and the bits 4 to 7
are used to select the width of the characters.
Height of the characters. Refer to the Table 2
Width of the characters. Refer to the Table 1
Table 1: Width of the characters
Table 2: Height of the characters
