AES-HM76Z1FL User Manual
51
www.acrosser.com
7. FAQ
Q 1. Why the Linux operating system can not re-install by the same storage
device?
• Make sure to clean up the original data on the storage device before installation.
• It is recommended to format the storage device before installation.
Q 2. Why the monitor display abnormally on screen during Linux
installation?
• Change another monitor and try to install again.
• Install the OS in "
basic graphics mode
".
Q 3. Why the display resolution only for 800x600 and 1024x768 at X Window
under Basic Graphics Mode?
• Make sure the Vender and Project of monitor detected correctly on the Display
conguration.
• Contact your monitor vender to get the driver for Linux.
• Adjust the settings in XORG.CONF:
• Determine the interval between the two frequencies (Max. and Min.) for both
horizontal scanning and vertical scanning your monitor supported.
For example:
HorizSync: 30.0 ~ 80
VertRefresh: 50 ~ 75
• Add the frequencies in XORG.CONF for that "vesa" device and monitor.
• Reboot system.
Q 4. Does my system support Windows 8?
• The system is designed and veried with Windows 7, Fedora 17 and Ubuntu
12.10. Acrosser did not verify this system with Windows 8. Please contact
Acrosser local sales representative or authorized channels to help you conrm
whether a new Windows 8 driver is provided.
Q 5. Why do we get error message when we execute utility program?
• Make sure all the drivers have been installed correctly.
• If the problem still exist, please contact Acrosser FAE or authorized sales
channels.
Q 6. What can I do if my system does not power on?
• If your system can not power on via adapter, below are a few steps you can
follow to attempt to correct the issue.
• Ensure that the power cord and AC adapter are plugged solid and not loose
tting.
• Ensure the adapter output is DC 12V (min. 60W)
