Produtos da Marca Acroprint

Basic hardware and variations

The electronic hardware is a new, versatile platform designed for

use with various applications. This manual describes, in detail, the

electronic hardware aspects of the terminal you have purchased.

The details concerning terminal firmware and host software are

addressed in the manual which comes with the software.

All terminals are equipped with:

1) a magnetic stripe reading head

2) a 2 row x 20 character per row display

3) a 16-key full travel keypad

4) an RS-232 serial port

5) a wand port for optional bar code wand

6) two control lines for external relay control (door access,

and bell ringer are typical applications)

7) a 25-pin parallel port

The terminal is offered in different hardware variations. Listed

below are the variations by part number and description:

Part # Description

C - Programmable e-prom (DataLog)

01-0120-000 DataLog with LAN (RS-485)

01-0120-002 DataLog with Modem (no LAN)

01-0120-003 DataLog with LAN & Internal Visible Bar Code Reader

01-0120-004 DataLog with Modem & Internal Visible Bar Code Reader

01-0120-005 DataLog with LAN & Internal Infrared Bar Code Reader

01-0120-006 DataLog with Modem & Internal Infrared Bar Code Reader

01-0120-008 DataLog with Ethernet

01-0120-010 DataLog with Ethernet & Internal Visible Bar Code Reader

01-0120-012 DataLog with Ethernet & Infrared Bar Code Reader

Acrocomm e-prom (Acroprint Data Collection Terminal  ADCT)

01-0147-000 Acroprint with LAN (RS-485)

01-0147-002 Acroprint with Modem (no LAN)

01-0147-003 Acroprint with LAN & Internal Visible Bar Code Reader

01-0147-004 Acroprint with Modem & Internal Visible Bar Code Reader

01-0147-005 Acroprint with LAN & Internal Infrared Bar Code Reader

01-0147-006 Acroprint with Modem & Internal Infrared Bar Code Reader

01-0147-008 Acroprint with Ethernet

01-0147-010 Acroprint with Ethernet & Internal Visible Bar Code Reader

01-0147-012 Acroprint with Ethernet & Infrared Bar Code Reader

Note: The part number of your unit can be found on the serial

number label on the back of the terminal.

1. Introduction

Introduction