iii
About this Manual
This manual provides you with instructions on installing your Trans-
port GT24. This manual is intended for experienced users and inte-
grators with hardware knowledge of personal computers.
This manual consists of the following parts
Chapter 1: Provides an Introduction to the Transport GT24
B4980 bare-bones, packing list, describes the
external components, gives a table of key compo-
nents, and provides block diagrams of the system.
Chapter 2: Covers procedures on installing the CPU, mem-
ory modules, and hard drives.
Chapter 3: Covers removal and replacement procedures for
pre-installed components
Appendix: Provides information on installing SMDC cards
and describes the differences between mainboard
BIOS and system BIOS. The FRU parts list and
cable connection tables are also provided for ref-
erence of system setup.
For information on the mainboard, please refer to the attached main-
board user’s manual. You can find the detailed description about
jumper and BIOS settings from the motherboard manual.
