iii
About this Manual
This manual provides you with instructions on installing your Tank
GT20. This manual is intended for experienced users and integra-
tors with hardware knowledge of personal computers.
This manual consists of the following parts
Chapter 1: Provides an Introduction to the Tank GT20 B5372
bare-bones, packing list, describes the external
components, gives a table of key components,
and provides block diagrams of the system.
Chapter 2: Covers procedures on installing the CPU, mem-
ory modules, an optional PCI-X card, and hard
drives.
Chapter 3: Covers removal and replacement procedures for
pre-installed components
Appendix: Provides information on installing SMDC cards
and describes the differences between mainboard
BIOS and system BIOS. The cable connection
tables are also provided for reference of system
setup.
For information on the mainboard, please refer to the attached main-
board user’s manual. You can find the detailed description about
jumper and BIOS settings from the motherboard manual.
