iii
About this Manual
This manual provides you with instructions on installing your
Tank GT20. This manual is intended for experienced users and inte-
grators with hardware knowledge of personal computers.
This manual consists of the following parts:
Chapter 1: Provides an Introduction to the Tank GT20 B5191
barebone, packing list, describes the external
components, gives a table of key components,
and provides block diagrams of the system.
Chapter 2: Covers procedures on installing the CPU, mem-
ory module, PCI card, and hard drive.
Chapter 3: Covers removal and replacement procedures for
pre-installed components
Appendix: Describes the differences between mainboard
BIOS and system BIOS. The cable connection
tables are also provided for reference of system
setup. F+
or SMDC setting up, please refer to Appendix III.
For information on the mainboard, please refer to the attached main-
board user’s manual. You can find the detailed description about
jumper and BIOS settings from the motherboard manual.
