Adjusting the water softener
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Level
47 - 50 84 - 90 8.4. - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
< 4 < 7 < 0.7 < 5
1
2)
1) Factory position.
2) Do not use salt at this level.
Electronic adjustment
1. Press the on/off button to activate the appliance.
2. If necessary, do the Reset function.
3. Press and hold the programme button until the
programme indicator
starts to flash
and the programme indicator
comes
on with fixed light.
4.
Wait until the programme indicator
goes off and the end indicator starts to flash. The
programme indicator
continues to
flash.
5. Press the programme button. The end indicator
starts to flash. The intermittent flashing of the end
indicator refers to the current set level.
• E.g. 5 flashes + pause + 5 flashes = level 5.
6. Press the programme button again and again to
change the setting. Each time you press the pro-
gramme button the level number increases.
7. Press the on/off button to deactivate the appliance
and to confirm the setting.
7
