
Menu Groups
14
Using printer menus
Custom Types
This menu item is used to define a name for each custom paper type. Assign names using a utility such as MarkVision™ or
from the operator panel.
Universal Setup
These menu items are used to specify the height and width of the Universal Paper Size. By specifying the height and width
for Universal Paper Size, the printer uses the Universal setting exactly like other paper sizes, including support for duplex
and n-up. For more information on n-up, see Multipage Print.
Reports
Menu Settings Page
This menu item prints a menu settings page.
Menu item Purpose Values
Custom Type <x> Specifies the type of media associated
with each Custom Type available in the
Paper Type menu.
*Paper
Card Stock
Transparency
Glossy
Labels
Envelope
The custom type media must be
supported in the designated source
in order to assign a user-defined
name.
Once the name is assigned, the
name (truncated to 16 characters)
is displayed instead of Custom
Type <x>.
Menu item Purpose Values
Units of Measure Determines the unit of measure
used to enter the Universal Height
and Width.
Inches
Millimeters
Inches is the US default and
Millimeters is the international default.
Portrait Width Sets the portrait width of the
universal media.
Note: If the value set exceeds the
maximum width, the printer uses the
maximum value allowed in inches or
millimeters.
3 inches to
14.17 inches in 0.01
inch increments
76 mm to 360 mm in
1 mm increments
Shows either inches or millimeters
from Units of Measure setting;
8.5 inches is the US default, and
216 mm is the international default.
Portrait Height Sets the portrait height of the
universal media.
Note: If the value set exceeds the
maximum height, the printer uses
the maximum value allowed in
inches or millimeters.
3 inches to
14.17 inches in 0.01
inch increments
76 mm to 360 in
1 mm increments
Shows either inches or millimeters
from Units of Measure setting;
14 inches is the US default, and
356 millimeters is the international
default.
Feed Direction Specifies the feed direction of the
Universal Paper Size.
*Short Edge
Long Edge
Long Edge is only shown if the longest
edge is shorter than the maximum
physical width that the printer tray can
accommodate.
Menu item Purpose Values
Menu Settings
Page
Prints information relating to the
default printer settings and verifies
that printer options are installed
correctly.
After selecting this item, the page prints and the printer returns
to Ready.