2. Turn the programme knob clockwise
until the programme marker is aligned
with the first washing programme.
3. Release the start/cancel button when
the on/off indicator and the start/cancel
indicator start to flash.
• At the same time, the end indicator
flashes intermittently. The number of
flashes shows the setting of the water
softener (example: 5 flashes / pause /
5 flashes = level 5).
4. Press the start/cancel button again and
again to change the setting. Each time
you press the start/cancel button, the
adjustment increases by 1 level.
5. Deactivate the appliance to confirm.
If the water softener is set electronically
to the level 1, the salt indicator light
stays off.
USE OF DISHWASHER SALT
How to fill the salt container:
1. Turn the cap counterclockwise and
open the salt container.
2. Fill the salt container with 1 litre of wa-
ter (only for the first time you fill with
salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from
the salt container when you fill it with
salt.
USE OF DETERGENT AND RINSE AID
8
1
2
3
4
5
6
7
Use of detergent
To help the environment, do not use
more than the correct quantity of deter-
gent.
Follow the detergent manufacturer rec-
ommendations on the detergent pack-
aging.
Do these steps to fill the detergent dispens-
er:
1.
Press the release button
2
to open the
lid
8
of the detergent dispenser.
2.
Put the detergent in the dispenser
1
.
3. If the washing programme has a pre-
wash phase, put a small quantity of de-
tergent in the prewash detergent com-
partment
3
.
4. If you use the detergent tablets, put the
tablet in the detergent dispenser
1
.
5. Close the detergent dispenser. Press
the lid until it locks into position.
22 leonard
