Prestige 643 ADSL Router
System Maintenance 10-11
FILE TYPE INTERNAL
NAME
EXTERNAL
NAME
DESCRIPTION AT
COMMAND
the trace log.
Firmware Ras *.bin This is the generic name for the ZyNOS
firmware on the Prestige.
ATUR
10.6 Backup Configuration
Entering 5 from Menu 24 – System Maintenance allows you to backup the current Prestige configuration
to your workstation. Backup is highly recommended once your Prestige is functioning properly.
You must perform backup and restore through the console port. Any serial communications program should
work fine; however, you must use XMODEM protocol to perform the download/upload.
Please note that the terms “download” and “upload” are relative to the workstation. Download means to
transfer from another machine to the workstation; upload means from your workstation to another machine.
Step 1. Go to Menu 24.5 (shown next).
Figure 10-10 Backup Configuration
Step 2. Press “Y” to indicate that you want to continue.
The following procedure is for the HyperTerminal program. The procedure for other serial communications
programs should be similar. Run the HyperTerminal program.
Step 1. Click “Transfer”, then “Receive File” to display the following screen.
Figure 10-11 HyperTerminal Screen
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
Choose the
Xmodem
Protocol.
Enter where the rom
configuration file is on
your computer.
Finally,
click
Send.
