Prestige 643 ADSL Router
System Maintenance 10-7
Table 10-3 System Maintenance Menu Syslog Parameters
FIELD DESCRIPTION
UNIX Syslog:
Active
Choose Yes to turn on or No to turn off syslog.
Syslog IP Address Enter the IP Address of the server that will log the CDR (Call Detail Record) and
system messages i.e., the syslog server.
Log Facility
Choose Local 1, Local 2, Local 3, Local 4, Local 4, Local 5, Local 6 or Local 7.
The log facility allows you to log the message in different files in the server. Please
refer to your UNIX manual for more detail.
Types:
CDR
Call Detail Record (CDR) logs all data phone line activity if set to Yes.
Packet triggered The first 48 bytes or octets and protocol type of the triggering packet is sent to the
UNIX syslog server when this field is set to Yes.
Filter log
Choose No to log no filters; choose Yes to log filters.
PPP log
PPP events are logged when this field is set to Yes.
Your Prestige sends four types of syslog messages. Some examples of these syslog messages with their
message formats are shown next:
1. CDR
CDR Message Format
SdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );
String = board xx line xx channel xx, call xx, str
board = the hardware board ID
line = the WAN ID in a board
Channel = channel ID within the WAN
call = the call reference number which starts from 1 and increments by 1 for each new call
str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.)
L02 Tunnel Connected(L2TP)
C02 OutCall Connected xxxx (means connected speed) xxxxx (means Remote Call Number)
L02 Call Terminated
C02 Call Terminated
