MWR211 User’s Guide
28
Table 5 Summary: Packet Statistics
LABEL DESCRIPTION
Port Displays the MWR222’s port type.
Status The LAN Port field displays the port speed and duplex setting if the
device is currently connected, or Down if the device is disconnected.
The WAN Port field displays the port speed and duplex setting if
you’re using Ethernet encapsulation. If you’re using PPoE or PPTP
encapsulation, it will display Idle if the line is idle, Dial if the device
is starting to trigger a call, or Drop if the device is dropping a call.
This field displays Down when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the
WLAN is enabled and Down when the WLAN is disabled.
TxPkts Displays the number of transmitted packets on this port.
RxPkts Displays the number of received packets on this port.
Collisions Displays the number of collisions on this port.
Tx B/s Displays the transmission speed in bytes per second on this port.
Rx B/s Displays the reception speed in bytes per second on this port.
Up Time Displays the length of time the MWR222 has been during this
session.
System Up Time Displays the total time the MWR222 has been on during all sessions.
Poll Interval(s) Enter the time interval in seconds for refreshing statistics in this field.
Set Interval Click this button to apply the new poll interval you entered in the
Poll Interval(s) field.
Stop Click Stop to stop refreshing statistics.
