Chapter 7 The WAN Configuration Screens
User’s Guide
76
7.3 WiMAX Configuration
Click ADVANCED > WAN Configuration > WiMAX Configuration to set up the
frequencies used by your WiMAX Modem.
In a WiMAX network, a mobile or subscriber station must use a radio frequency supported by
the base station to communicate. When the WiMAX Modem looks for a connection to a base
station, it can search a range of frequencies.
Radio frequency is measured in Hertz (Hz).
Figure 34 ADVANCED > WAN Configuration >WiMAX Configuration
IP Subnet Mask Enter a subnet mask in dotted decimal notation.
Refer to the appendices to calculate a subnet mask If you are implementing
subnetting.
Gateway IP
Address
Specify a gateway IP address (supplied by your ISP).
Apply Click to save your changes.
Reset Click to restore your previously saved settings.
Table 19 ADVANCED > WAN Configuration > Internet Connection > ISP Parameters for
Internet Access (continued)
LABEL DESCRIPTION
Table 20 Radio Frequency Conversion
1 kHz = 1000 Hz
1 MHz = 1000 kHz (1000000 Hz)
1 GHz = 1000 MHz (1000000 kHz)
