Chapter 6 The LAN Configuration Screens
User’s Guide
61
6.3 Static DHCP
Click ADVANCED > LAN Configuration > Static DHCP to assign specific IP addresses to
specific computers on the LAN.
A This screen has no effect if the DHCP server is not enabled. You can enable it
in ADVANCED > LAN Configuration > DHCP Setup.
Figure 23 ADVANCED > LAN Configuration > Static DHCP
First, Second and
Third DNS Server
Specify the IP addresses of a maximum of three DNS servers that the network can
use. The WiMAX Modem provides these IP addresses to DHCP clients. You can
specify these IP addresses two ways.
From ISP - provide the DNS servers provided by the ISP on the WAN port.
User Defined - enter a static IP address.
DNS Relay - this setting will relay DNS information from the DNS server obtained
by the WiMAX Modem.
None - no DNS service will be provided by the WiMAX Modem.
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.
Table 12 ADVANCED > LAN Configuration > DHCP Setup (continued)
LABEL DESCRIPTION
