Chapter 2 Introducing the Web Configurator
User’s Guide
38
2.1.2 The Reset Button
If you forget your password or cannot access the web configurator, you will need to use the
Reset button to reload the factory-default configuration file. This means that you will lose all
configurations that you had previously and the password will be reset to “1234”.
2.1.2.1 Using The Reset Button
1 Make sure the Power light is on (not blinking).
2 To set the device back to the factory default settings, press the Reset button for ten
seconds or until the Power light begins to blink and then release it. When the Power
light begins to blink, the defaults have been restored and the device restarts.
3 Reconfigure the WiMAX Modem following the steps in your Quick Start Guide.
2.2 The Main Screen
When you first log into the web configurator and by-pass the wizard, the Main screen appears.
Here you can view a concise summary of your WiMAX Modem connection status. This is also
the default “home” page for the ZyXEL web configurator and it contains conveniently-placed
shortcuts to all of the other screens.
A Some features in the web configurator may not be available depending on
your firmware version and/or configuration.
Figure 9 Main Screen
