Chapter 1 Getting Started
User’s Guide
33
1.2 WiMAX Modem Hardware
Follow the instructions in the Quick Start Guide to make hardware connections.
1.2.1 LEDs
The following figure shows the LEDs (lights) on the WiMAX Modem.
Figure 4 The WiMAX Modem’s LEDs
The following table describes your WiMAX Modem’s LEDs (from right to left).
Table 2 The WiMAX Modem
LED STATE DESCRIPTION
Power Off The WiMAX Modem is not receiving power.
Red The WiMAX Modem is receiving power but has been
unable to start up correctly or is not receiving enough
power. See the Troubleshooting section for more
information.
Green The WiMAX Modem is receiving power and functioning
correctly.
LAN Off The LAN is not connected.
Green The WiMAX Modem has a successful Local Area Network
(Ethernet) connection and is active during modem activity.
Voice Off No SIP account is registered, or the WiMAX Modem is not
receiving power.
Green A SIP account is registered.
Green (Blinking) A SIP account is registered, and the phone attached to the
LINE port is in use (off the hook).
Yellow A SIP account is registered and has a voice message on
the SIP server.
Yellow (Blinking) A SIP account is registered and has a voice message on
the SIP server, and the phone attached to the LINE port is
in use (off the hook).
WI MAX
LI NK
STRENGTH
I NDI CATOR
VOI CE
LEDS
POWER
LED
LAN
LEDS
1 & 2 1 & 2
