Prestige 650HW ADSL Router User’s Guide
Call Scheduling 14-3
Table 14-1 Schedule Set Setup Fields
FIELD DESCRIPTION EXAMPLE
How
Often
Should this schedule set recur weekly or be used just once
only? Press the [SPACE BAR] and then [ENTER] to select
Once or Weekly. Both these options are mutually exclusive.
If Once is selected, then all weekday settings are N/A.
When Once is selected, the schedule rule deletes
automatically after the scheduled time elapses.
Once
Once:
Date
If you selected Once in the How Often field above, then
enter the date the set should activate here in year-month-
date format.
2000-01-01
Weekday
:
Day
If you selected Weekly in the How Often field above, then
select the day(s) when the set should activate (and recur) by
going to that day(s) and pressing [SPACE BAR] to select
Yes, then press [ENTER].
Yes
No
N/A
Start
Time
Enter the start time when you wish the schedule set to take
effect in hour-minute format.
09:00
Duration Enter the maximum length of time this connection is allowed
in hour-minute format.
08:00
Action Forced On means that the connection is maintained
whether or not there is a demand call on the line and will
persist for the time period specified in the Duration field.
Forced Down means that the connection is blocked whether
or not there is a demand call on the line.
Enable Dial-On-Demand means that this schedule permits
a demand call on the line. Disable Dial-On-Demand means
that this schedule prevents a demand call on the line.
Forced On
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to
Confirm…” to save your configuration, or press [ESC] at any time to cancel.
Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11
from the Main Menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE or
PPPoA in the Encapsulation field and then press [ENTER] to make the schedule sets field available as
shown next.
