
1
2
Open the pump door lev-
ering on the groove with
a coin (or with the suita-
ble tool, that you can
find in the bag contain-
ing the instruction book-
let, depending on the
model).
Place a bowl with a
small edge close to the
pump to collect any spill-
age.
Pull out the emergency
emptying cap from the
pump cover, using pliers.
1
2
When no more water
comes out, unscrew the
pump cover, using pli-
ers, and remove the fil-
ter. Always keep a rag
nearby to dry up any wa-
ter spillages when re-
moving the cover.
Clean the filter under a tap, to remove any traces of
fluff.
Remove foreign bodies
and fluff from the filter
seat and from the pump
impeller.
Check carefully whether the pump impeller rotates
(it rotates jerkily). If it doesn’t rotate, please contact
your Service Centre.
Replace the filter into the pump by inserting it cor-
rectly into the special guides. Screw the pump cov-
er firmly by turning it clockwise.
Replace the emergency
emptying cap into the
pump cover and fix it firm-
ly.
Close the pump door.
Warning! When the appliance is in use and
depending on the programme selected there can be
hot water in the pump.
Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty.
When refitting the pump cover, ensure it is securely re-
tightened so as to stop leaks and young children being able
to remove it.
18