• Remove the polystyrene base from the bot-
tom.
• Return appliance
to it's upright posi-
tion.
• Open the door and
remove the plastic
hose guide, the
bag containing the
instruction booklet
and the plastic
plug caps from the
drum.
• Remove the power supply cable and the
draining and inlet hose from the hose hold-
ers on the rear of the appliance.
• Unscrew the three bolts and remove the
hose holders.
• Slide out the relevant plastic spacers.
Warning! Do
not remove
the drain hose
from the rear sup-
port. Remove this
hose only if it is
necessary to drain
the water. Refer to
"Frost precaution"
and "What to do if".
• Plug the smaller upper hole and the two
large ones with the corresponding plastic
plug caps.
7
www.zanussi.com
