ADJUSTING THE RINSE AID LEVEL
You can set the released quantity of rinse aid between level 1 (minimum quantity) and level 6 (maximum
quantity).
Level 0 will deactivated and no rinse aid will be released.
Factory setting: level 4.
While the appliance is in user mode:
1. Press
.
• The indicators , and go off.
• The indicator continues to flash.
• The display shows the current setting: e.g.
= level 4.
2. Press to change the setting.
3. Press the on/off button to confirm the setting.
ACTIVATING THE ACOUSTIC SIGNAL FOR THE END OF PROGRAMME
By default this acoustic signal is deactivated but it is possible to activate it.
While the appliance is in user mode:
1. Press
.
• The indicators , and go off.
• The indicator continues to flash.
• The display shows the current setting:
–
= acoustic signal off.
– = acoustic signal on.
2. Press to change the setting.
3. Press the on/off button to confirm the setting.
BEFORE FIRST USE
1. Make sure that the current level of the
water softener agrees with the hardness
25
