
• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of
the appliance.
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
Control panel
78
123 4
56
1 Programme knob
2 Start/cancel button (Start/Cancel)
3 Multitab button (Multi Tab)
4 Delay start button (Delay)
5 Digital display
6 Indicator lights
7 Programme marker
8 Off position
Indicator lights
Wash phase The wash phase indicator light comes on when the washing phase or the rinsing phase
operates.
Dry phase The dry phase indicator light comes on when the drying phase operates.
Multitab The multitab indicator light comes on when the multitab function is active.
Salt
1)
The salt indicator light comes on when it is necessary to fill the salt container. Refer to
the chapter 'Use of dishwasher salt'.
After you fill the container, the salt indicator light can continue to stay on for some
hours. This does not have an unwanted effect on the operation of the appliance.
19