
The programme marker must be aligned with .
• Make sure that the appliance is in programme selection mode.
• Press and hold and simultaneously turn the knob counterclockwise until the programme marker is
aligned with .
• Release when Delay and start to flash.
• Press . Indicators , Delay and flash. The current setting is indicated by the intermittent
flashing of the indicator : e.g. 5 intermittent flashes + pause + 5 intermittent flashes = level 5.
• Press to change the setting. Each time you press the button, the level increases. After level 10 you
will start again from level 1.
• Turn the knob to to confirm the setting.
ADDING SALT
Before first use put one litre of water in the salt container.
Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after
you fill the salt container, start a programme.
ADDING RINSE AID
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot
rinse phase.
20