INDEX
Parse failure; unrecognized operator: <n> 14-16
Printer Client-Layer is not responding. 15-43
Printer failed to send configuration. 15-43
Printer is not answering the Controller‘s 15-43
state request.
Printer is ready. 15-43
Printer is reinitializing. 15-44
Problem with insert file; invalid file folder: 14-16
“fileType.”
Processing nested too deep. 14-17
Property name not found during GETP 14-17
operation.
R
Read error during save. 15-44
Recovered from system rollover. 14-18
Report definition file read / open error. 15-44
Requested memory length exceeds 14-9
maximum size limit.
Restoring previous file, xxxx, due to error(s). 11-5
Run font through fix on CD/IG Version 2 11-5
or higher.
S
Scaling bitmap. 11-5
Scaling font: xxxx to: yyyy. 11-5
Scaling form: xxxx. 11-5
Scaling FST entry. 11-5
Scaling header. 11-6
Scaling logo: xxxx. 11-6
Scaling TL numbers. 11-6
Scaling TL/DL nn. 11-6
Second system rollover. 14-9
Segmented or duplicate attribute 15-44
not allowed for AUD File Mgr
Autoincrementing key.
Select DOWNLOAD CONTROLLER or 15-44
enter PSC when you wish to attempt
connection to the Printer.
Set Tray Size is unavailable in print. 15-44
Sheet delivery signal but no output phase 15-44
record exists.
Sheet delivery signal but not processing 15-44
output phase.
SOR-input received out of sequence - 15-44
already in input phase.
SOR-output received out of sequence - 15-45
already in output phase.
Specified color not implemented. 14-6
Specified file does not exist. 15-45
String off paper on page n at 14-6
<nn.nnn>,<nn.nnn> [inches];
<nn.nnn>,<nn.nnn> [cm].
Substituting n point (rotated n degrees) 14-12
characters.
“SYS>IPFNTS” invalid; recompile 14-18
“JSL>IPFNTS.”
System does not handle graphics. 14-3
System has insufficient disk space to format 15-45
log xxxx. Convert or Print request has
been cancelled.
T
Target filename already exists. 15-45
The Current Log is empty. 15-45
The Current Log is in use and cannot be 15-45
emptied.
The Current Log is unreadable and cannot 15-45
be(emptied/deleted/printed/displayed/saved).
Call for Service.
The Current Log is unreadable and cannot 15-46
be(emptied/deleted/printed/displayed/saved).
Use a backup log.
The diskette has insufficient space. The 15-46
System is unable to save the log.
The Note file format is invalid. Delete the 15-46
Note and resave with valid data, then retry
the operation.
There are no Hints (*). 15-46
The UI and system are not synchronized. 15-46
Finish jobs and reboot the system.
The UI has reached its memory limit. All 15-46
windows and menus are being closed to
restore memory.
The UI is reaching its memory limit. Close 15-46
any windows or menus that are not being used.
INDEX-8 XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
