14
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
1.Packing
•
The packing material is recyclable as indicated by the
recycling symbol . Adhere to local regulations
when disposing of packaging material.
2.Energy saving tips
•
Achieve the best use of energy, water, detergent and
time by using the recommended maximum load size.
•
Do not exceed manufacturers’ recommended
dosages as shown on the detergent package.
•
The Eco Flap - a special system in the outlet - will
prevent detergent loss from the drum to avoid
detergent loss into the environment.
•
Use “Prewash” for heavily soiled laundry only!
Save detergent, time, water and energy
consumption by not selecting “Prewash” for slight
to normally soiled laundry. You save on water,
energy and time as a result.
•
Pretreat stains with stain remover or soak dried in
stains in water before washing to reduce the
necessity of a hot wash program.
•
Save energy by using a 60° C instead of a 90° C
wash programme or a 40° C instead of a 60° C
wash programme.
•
Save energy and time by selecting a high spin
speed to reduce the water content in laundry
before using a drying programme (for appliances
with adjustable spin speed).
3.Disposing of packaging and old
appliances
•
The appliance is built from reusable materials.
Dispose of the appliance in conformity with
environmental regulations.
•
Before scrapping, cut off the power cable so that the
appliance cannot be connected to the mains.
•
Remove detergent from compartment if you
intend scrapping your appliance.
4.Child safety
•
Children must not be allowed to play with the
appliance.
5.General recommendations
•
When the appliance is not in use unplug it and
turn off the tap.
•
Before cleaning or carrying out maintenance
switch off the appliance and disconnect it from
the mains supply.
•
To clean the outside of the appliance, use a
neutral detergent and a damp cloth.
•
Do not use abrasive detergents.
•
Do not attempt to force the door open.
•
If necessary, the power cable may be replaced
with an identical one obtained from our
After-Sales Service. The power cable must only
be replaced by a qualified technician.
6.EC Declaration of Conformity
•
This appliance has been designed, constructed
and distributed in compliance with the safety
requirements of EC Directives:
73/23/EEC Low Voltage Directive
89/336/EEC Electromagnetic Compatibility
Directive
93/68/EEC CE Marking Directive .
3gb20021.fm Page 14 Thursday, May 13, 2004 4:01 PM
Black process 45.0° 150.0 LPI
