Prodotti del Marchio Whirlpool

Function Effect Comments Enabled

with

programme-

D e l a y

T i m e r

Delays the

start of the

wash by up to

9 hours.

Press the button repeatedly until the LED corresponding to

the desired delay is turned on.

The fifth time the button is pressed, the function will be

disabled.

N.B.: Once you have pressed the Start/Reset button, the

delay can only be decreased if you wish to modify it.

All

S u p e r

W a s h

Allows for an

impeccable

wash, visibly

whiter than a

standard

Class

wash.

This function is incompatible with the RAPID function.

1, 2, 3, 4,

5, 6, 7, 8

E a s y i r o n This option

reduces the

amount of

creasing on

fabrics, making

them easier to

iron.

W hen this function is set, programmes 6, 7, 8, 11 and

Delicate rinse will end with the laundry left to soak (Anti-

crease) and the Rinse cycle phase LED will flash.

- to conclude the cycle, press the START/RESET button;

- to run the draining cycle alone, set the knob to the

relative symbol and press the START/RESET button.

All

programmes

except for

1, 2, 9, 10

and

Draining.

R a p i d Cuts the

duration of the

wash cycle by

30%.

This function is incompatible with the SUPER W ASH

function.

1, 2, 3, 4,

5, 6, 7, 8

ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description

Personalisations

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6).

The temperature can be lowered, or even set to a cold wash (

Setting the spin speed

Turn the SPIN SPEED knob to set the spin speed for the programme selected.

The maximum spin speeds for each programme are as follows:

Programmes Maximum spin speed

Cottone 1200 rpm

Synthetics 800 rpm

Wool 600 rpm

Silk no

The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting symbol

The washing machine will automatically prevent you from selecting a spin speed higher than the maximum

speed for each programme.

Functions

To enable a function:

1. press the button corresponding to the desired function, according to the table below;

2. the function is enabled when the corresponding button is illuminated.

Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the

programme set.