4
A - Adjustable flaps (2 or 4): in horizontal position
for cups/long utensils/stemmed glasses.
B - Cutlery basket: can be placed in the upper rack when
the “Half load/Multizone” option is selected.
The Grid (F) should be removed.
Arrange crockery so that water does not collect in cavities, ensuring that the spray arms turn freely. Only use dishwasher-proof crockery and dishes. Do not use the dishwasher for washing wooden
items, aluminium, tin, silver cutlery or decorated crockery (unglazed). In the baskets, dishes (e.g. plates, bowls, pots) must be placed in a correct way to let water flow down!
A - OPENA - CLOSED
TO OPEN A:
AB
C
D
THE LATERAL SUPPORT CAN BE REMOVED:
pull the support to the front of the basket and lift
to remove it.
E - Cutlery basket
F - Grid: helps to keep the cutlery separate for better washing results.
G - Vertical plate holders: they can be folded down to load pots.
H - Lateral support with foldable flaps (if available): shelves can be used to hold
long tools or cups onto.
A
LOWER RACK - depending on the model
D - CLOSED
How to remove the upper rack (if available)
It could be useful to remove the upper rack to load bulky items in the lower rack.
- Open the two retainers (D) to
take off the upper rack (when the
upper rack is in place the
retainers must always be closed).
D - OPEN
How to adjust upper rack height (if available).
It could be useful to lift up the upper rack to have
more space in lower rack or bring it down to load
long stem glasses.
- Grasp and take out the two lateral handles (C)
(they must be on the same level)
and lift up or take
down the upper rack.
How to use PowerClean
®
1. Adjust the PowerClean
®
area (G) folding
down the rear plate holders to load pots.
2. Load pots and casseroles inclined vertically
in PowerClean
®
area. Pots have to be
inclined towards the power water jets.
PowerClean
®
uses the
special water jets in the
rear of cavity to wash
more intensively the high
dirty items.
Switching on the appliance. Press any button (except CANCEL/Off button) to switch on the control panel and start programming.
