Dil ID: 8
Dil Adı: italy
Dil Kodu: it9tayfun Prodotti del Marchio Shure
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



©2011 Shure Incorporated
27A15525 (Rev. 1)
Printed in USA
General Description
The MX150 is a professional subminiature electret condenser lavalier microphone ideal for
use in speech and other applications requiring low-profile, discreet placement. Available
with cardioid or omnidirectional patterns, the MX150 provides uncompromised sound qual-
ity and high reliability with minimal visibility for use in television broadcasting, corporate
lectures, A/V teleconferencing, House of Worship, and sound reinforcement. CommShield
®
Technology offers superior RF immunity from cellular devices and digital bodypack trans-
mitters. Each microphone is supplied with a snap-fit foam windscreen to minimize wind
noise and a multi-position tie clip with integrated cable management to minimize cable
handling noise.
Features
Available in cardioid or omnidirectional polar patterns and TQG (for use in Shure
bodypacks) or wired XLR variations
CommShield
®
Technology guards against interference from Cellular RF devices and
digital bodypack transmitters
Matte black, sleek, low-profile, design for inconspicuous placement
Multi-position tie clip allows for a variety of placement options and features an integrated
cable management system for convenient cable dress with minimized handling noise
Kevlar-reinforced soft-flex cable design further reduces handling noise while providing
superior flexibility for routing and placement
User-changeable equalization caps for response shaping (omnidirectional only)
Snap-fit, concise windscreen provides protection from plosives and wind noise with
minimal visibility
Legendary Shure quality, ruggedness, and reliability
TQG Models
Using with Other Bodypack Transmitters
When connecting the microphone to anything other than a Shure wireless bodypack,
ensure the device provides a regulated +5 V DC (130 µA minimum) to the red conductor.
Refer to the wiring diagram in the specifications.
Model Variations
The MX150 is available in several varieties:
Polar Pattern
C Cardioid
O Omnidirectional
Connectors
TQG For Shure transmitters with 4-pin TA4F/TQG connectors
XLR Includes the RK100PK in-line preamplifier
Snap-fit Windscreen
Use the furnished snap-fit windscreen to provide plosive and wind
protection.
Snap into the groove below the cartridge to secure to the
microphone.
To remove, grab the plastic cage in the windscreen and lift over
capsule.
XLR Models
Phantom Power
The supplied RK100PK preamplifier requires phantom power and performs best with a 48
V DC supply (IEC-61938). However, it will operate with slightly decreased headroom with
supplies as low as 11 V DC.
Most modern mixers provide phantom power. You must use a balanced microphone cable:
XLR-to-XLR or XLR-to-TRS.
RFI Filtering
This microphone features CommShield
®
Technology for RF filtering. For best results in
hostile RF environments, always use the RK100PK preamp furnished with the XLR ver-
sions of this microphone.
Mounting the Microphone
This microphone is furnished with a multi-position tie clip for flex-
ible mounting options and reduced cable noise. Reference the
furnished tie clip guide for placement and routing suggestions.
20
15
10
5
0
-30
-25
-20
-15
-10
-5
dB
Hz
20 100 1k 10k 20k
0,6 m (2 ft.) from sound source
Equalization Caps
The omnidirectional MX150B/O variations ship with two types of equalization caps for high-
frequency shaping:
The cardioid MX150B/C variations are only compatible with the gold cap shipped with the
microphone. Do not use the silver and black omnidirectional screens.
Normal: Silver color screen; provides the
most natural sound in most applications
Presence Boost: Black screen; provides a
smooth, high-frequency boost
Certifications
Eligible to bear CE Marking. Conforms to European EMC Directive 2004/108/EC. Meets
Harmonized Standards EN55103-1:1996 and EN55103-2:1996, for residential (E1) and
light industrial (E2) environments.
The CE Declaration of Conformity can be obtained from: www.shure.com/europe/
compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Note: Information in this guide is subject to change without notice. For additional informa-
tion about this product, please visit www.shure.com.
MX150B/C-TQG
Accessories and Parts
Furnished Accessories
Multi-Position Tie Clip (3) RPM150TC
Snap-fit Windscreen (3) RPM150WS
Storage Pouch WA150
In-Line Preamplifier (XLR version only) RK100PK
Replacement Parts
Normal Cap, Gold, for MX150B/C (5) RPM208
Normal Cap, Silver, for MX150B/O (5) RPM213
Boost Cap, Black, for MX150B/O (5) RPM215
4-Pin Mini Connector (TA4F/TQG) WA330
MX150B/CMX150B/O
MX150 Subminiature
Lavalier Microphone