English
5
LX1 BODY-PACK TRANSMITTER
FEATURES, CONTROLS, & INDICATORS (FIGURE 2)
ON
MUTE BAT
OFF PWR
1
2
3
4
5
6
7
8
LX1 BODY-PACK TRANSMITTER FEATURES, CONTROLS & INDICATORS
FIGURE 2
1. Antenna. A flexible wire antenna is permanently attached to the bottom of the LX1
body-pack transmitter. For best operation, the antenna must hang in the vertical
position, and should not be coiled or bundled.
2. Battery Compartment. Hinged cover on bottom surface exposes the battery. Refer
to the Body-Pack Transmitter Battery Installation section.
3. Audio Gain Control. Allows audio level adjustment to accommodate various
sound sources (e.g., singing, speaking, or playing an instrument). A small screw-
driver is supplied to make adjustments (see the Setting Audio Level section).
4. Input Jack. This is a Mini- connector (TA4F) that provides connection with a variety
of lavalier and headset microphone cables, and the Shure WA302 instrument
adapter cable.
5. Power/Battery Fuel Gauge. When the Power switch is turned to the PWR position,
one or two of the three lights on the transmitter illuminates, indicating power to the
unit. The color of the glowing light(s) indicates the amount of battery life remaining.
Refer to the
Checking the Transmitter Battery section.
6. Belt Clip. Allows the transmitter to be easily worn on a belt, waistband or guitar
strap.
7. Mic On/Mute Switch. “Mutes” the transmitter to prevent unwanted sounds from be-
ing picked up by the receiver without turning the transmitter off.
8. Power Switch. Turns transmitter power on and off.
