SCION tC 2007 SUPERCHARGER
Procedure
Page 33 of 36
Issue A: 04/10/07
(e) Replace engine cover. Torque to 62 inch-lbs.
(f)
Select a suitable location under the vehicle
hood and install the
Belt Routing Label, the
CARB EO Emissions Compliant Label, and
the
TRD Tune-Up Label. Clean the area first
of any dirt or contamination so that the labels
will adhere properly. NOTE: Do NOT cover
over any OE labels.
(g)
Install Premium Fuel Only decals. Place one
on dash near fuel gage AND also one near fuel
filler cap.
(h)
Replace plastic battery tray and battery.
NOTE: Be sure to locate battery in battery tray
all the way forward AND all the way toward
the driver side of the tray. Replace hold down
strap.
(i)
Connect Battery Positive. Be sure to route
Battery (B+) cable safely away from engine
components, supercharger components,
abrasive surfaces, and any sharp objects.
Recommend routing is between battery and air
box assembly.
(j) Connect Battery Negative.
14. ECM Re-Flash
(a) After completing the main supercharger
installation instructions, download ECM
Calibration Update from TIS.
Manual: 3YW20300
Automatic: 3YW20400
Note: Refer to TSB# SS002-01 for ECU
Reprogramming
10 mm socket
Fi
113
