SCION tC 2007 - SECURITY (V5)
Procedure
Page 7 of 28 pages
Issue: B 02/27/06
FOR AUTOMATIC TRANSMISSION MODELS
ONLY. (Steps e – f)
(e) In the ignition switch area, locate the white
4P connector’s BLACK wire (top row, first
space from the left). Attach the V5 harness’
BLACK wire with a splicing connector.
(Fig. 2-4)
(1) Turn the connector so the wires face you
and the tab is on top.
(2) Verify the correct wire is chosen for
splicing.
(3) Verify the splicing connector is applied
properly.
(f) Route the V5 harness upward along the
steering column, then secure it to the vehicle
harness with one wire tie. (Fig. 2-4)
FOR MANUAL TRANSMISSION MODELS ONLY.
(Steps g –h)
(g) Locate in the ignition switch area the white
2P connector’s BLACK wire in the first
space from the left, and attach the V5
harness’ BLACK wire with a splicing
connector. (Fig. 2-5)
(1) Turn the connector so the wires face you
and the tab is on top.
(2) Verify the correct wire is chosen for
splicing.
(3) Verify the splicing connector is applied
properly.
(h) Route the V5 harness upward along the
steering column, then secure it to the vehicle
harness with one wire tie. (Fig. 2-5)
BLACK
Wire Side View
Pliers, Side Cutter
4P
4P (White)
S
licin
Connecto
V5 Harness
Fig. 2-4
Wire Tie
Fig. 2-5
BLACK
Wire Side View
Pliers, Side Cutter
2P
2P (White)
Splicing Connector
V5 Harness
Wire Tie
