SCION tC 2007 - SECURITY (V5)
Checklist - these points MUST be checked to ensure a quality installation.
Check: Look For:
Page 25 of 28 pages
Issue: B 02/27/06
Press and release the remote control’s
unlock button to stop the alarm.
Press and release the remote control’s lock
button to start the system’s arming process,
then wait 30 seconds until the system is
armed.
Roll up all windows, remove the key and
exit the vehicle.
Press and release the remote control’s lock
button to start the arming process.
Wait 30 seconds.
Perform the following check in a
temperature-controlled environment
(50° - 90° F.)
With the tip of key (or Striker Tool pulled
all way out (PPO only)), tap the center of
the driver’s door window to trigger the
“warn away” alarm.
14. The horn stops sounding.
All the lights stop flashing.
The LED turns off
15. Refer to step #1 and #2.
16. Refer to step # 1.
17. After 30 seconds, the LED starts flashing;
the system is now armed.
18. The horn sounds repeatedly.
The headlights flash repeatedly.
The turn signal lights flash repeatedly.
The LED lights up.
NOTE: Adjust as necessary by increasing
the GBS setting to the next level if the
alarm does not trigger during the functional
verifications.
NOTE: If you do not disarm the system,
the alarm will last 20 seconds. It is not
necessary to check the alarm duration.
