Prodotti del Marchio Scion

SCION xA 2006 - SECURITY WITH RKE (V3)

Procedure

Page 2 of 22 pages

Issue: C 05/24/05

DIO

Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this

accessory should follow approved guidelines to ensure a quality installation.

These guidelines can be found in the "Accessory Installation Practices" document.

This document covers such items as:-

-- Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.).

-- Safety (eye protection, rechecking torque procedure, etc.).

-- Vehicle Disassembly/Reassembly (panel removal, part storage, etc.).

-- Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.).

Please see your Toyota dealer for a copy of this document.

1. Vehicle Disassembly.

(a) For automatic equipped vehicles, place the

shifter in low gear and set the parking brake

prior to disconnecting the battery.

(b) Remove the negative battery cable. (Fig. 1-1)

(1) Protect the fender before starting.

(2) Do not touch the positive terminal with

any tool when removing the cable.

the driver's side step cover. (Fig. 1-2)

(1) Cover the floor and seats before starting.

(2) Remove the float clip first to prevent

damaging the panel.

(d) Remove the driver's side cowl cover.

(Fig. 1-3)

(1) Remove the nut securing the cowl cover.

Fig. 1-3

Nut

Cowl Cover

Fig. 1-2

ylon Panel Removal Tool

Step Cover

Float Clip

Fig. 1-1

10mm Wrench

egative

Battery

Cable

Battery