SCION xA 2006 - SECURITY WITH RKE (V3)
Checklist - these points MUST be checked to ensure a quality installation.
Check: Look For:
Page 19 of 22 pages
Issue: C 05/24/05
DIO
Press and release the remote control's
unlock button to stop the alarm.
Press and release the remote control's lock
button to start the system's arming process,
and then wait 30 seconds until the system is
armed.
Unlock and open one of the rear passenger
doors to trigger an alarm.
Repeat the above steps with the other rear
passenger and back door (if equipped).
Roll up all windows, remove the key and
exit the vehicle.
Press and release the remote control's lock
button to start the system's arming process.
Wait 30 seconds.
Perform the following check in a
temperature-controlled environment
(50° - 90° F.)
Using the striker tool, tap the center of the
driver's door window to trigger the "warn
away" alarm.
21. The horn stops sounding.
All the lights stop flashing and/ or turn
off.
The Status Monitor's LED turns off.
22. Refer to Steps 1 and 2.
Refer to Step 9.
24. Refer to Steps 22 and 23.
25. Refer to Step 1.
26. After 30 seconds, LED starts flashing;
the system is now armed.
27. The horn sounds repeatedly.
The headlights flash repeatedly.
The tail and marker lights flash
repeatedly.
The LED lights up.
