16
Attach the factory mounting brackets
and the 95-8202 DDIN trim plates to
the DDIN head unit with the screws
supplied with the unit.
(Figure B)
NOTE: Remove locating pins from fac-
tory brackets with grinder.
1
Attach the factory mounting brackets
and the 95-8202 DDIN trim plates to
the stacked ISO DIN head units with
the screws supplied with the units.
(Figure C) NOTE:
Remove locating pins
from factory brackets with grinder.
Continue to final assembly.
1
A
C
DOUBLE DIN HEAD UNIT PROVISION
ST
ACKED ISO HEAD UNIT PRO
VISION
B
95-8202
KIT ASSEMBLY
NOTE: For all Scion TC and XA you will
need to cut off the front upper section of
the DDIN trim plates, as shown by dotted
lines labeled “A” in
(Figure A).
For the 2001-2006 Toyota Rav 4, the
2001-2006 Toyota Highlander, and the
2003-2006 Toyota Sequoia/Tundra you
will need to cut off the rear section of
the DDIN trim plates, as shown by dotted
lines labeled “B” in
(Figure A).
For all other vehicles skip to Step 1.
