Dil ID: 8
Dil Adı: italy
Dil Kodu: it7tayfun Prodotti del Marchio Rena
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi
Anasayfa > Marche > Rena > Stampante > L-350
-1-
SPECIFICATIONS
L-350 TABBER/LABELER/STAMP AFFIXER
DIMENSIONS:
16
1
/
2
" W x 19" H x 18" L
SPEED – TABBER:
Variable from 5,000 - 20,000 per hour ( Tri-folded 60 lb.
Offset Stock)
SPEED – LABLER
Variable from 5,000 - 20,000 per hour ( No.10 envelopes )
Postcards 20,000 per hour
9" x 12" flats 12,000 per hour
MEDIA SIZE:
Length – 3 5/8” min., 18" max.
Width - 5" min., 16" max.
MEDIA THICKNESS:
Label: single 20lb sheet min. - up to
5
/
16
" max.
Tab: folded 20lb piece min. - up to
1
/
8
” max.
TAB SIZE:
Length - **
5
/
8
" to 1
1
/
2
", Width -
1
/
2
" to 2"
TAB TYPES
Paper, *Clear, *Translucent
* must have engineered backing (black area below tab)
LABEL SIZE:
Length - **
5
/
8
" min., 15" max, Width -
1
/
2
" min., 6
1
/
2
" max.
Automatically compensates for most color labels and
backing
STAMP:
Can apply stamps to pieces up to 9.5” in length.
FEEDER:
Top-load, bottom-feed for continuous operation.
HOPPER CAPACITY:
Postcards 800
No.10 envelopes 250
9"x12"flats 250
ZIP SORT:
Switch selectable electronic sensor (labeler only)
COUNTER:
Resettable 5-digit LCD
ELECTRICAL:
110 VAC /60 Hz 2 Amp (220 VAC / 50 Hz available)
SHIPPING WEIGHT:
70 Ibs /32 kg
NOTE: There are two types of tabs/labels used commercially. One is designed for hand,
and the other is for machine application. Use tabs/labels designed ONLY for machine
application with the Tabber/Labeler. Avoid using tabs/labels with little or no contrast
between tab/label and backing. Less than 2 clicks on the tab/label sensitivity adjustment
will not allow unit to run properly. Doubles and misfeeds are a symptom of the wrong label
being used.
** Assuming tab/label has a 1/8” gap between tabs/labels. If gap is larger this increase will increase the
minimum label length. Example: ¼” gap = ¾” min label/tab length.