Prodotti del Marchio Planet

- 4 - - 5 - - 6 - - 7 -

4. Wired Network Conguration

(Windows 7)

A computer with wired Ethernet connection is required

fortherst-timecongurationoftheWirelessAP.

1. Click “Start” button located at the lower-left

corner of your computer.

2. Click “Control Panel”.

3. Double click “Network and Sharing Center”

icon.

4. Click “Change Adapter Settings”.

5. Double click “Local Area Connection”.

6. Select “Internet Protocol Version 4 (TCP/

IPv4)” and click “Properties”.

7. Select “Use the following IP address”, and then

click “OK” button twice to save the congura-

tion. For example, as the default IP address of the

WNAP-W2200 is 192.168.1.253 and the router is

192.168.1.254, you may choose from 192.168.1.1

to 192.168.1.252.

5. Enter into the Web Management

Default IP Address: 192.168.1.253

Default Username: admin

Default Password: admin

Default SSID: WNAP-W2200_XXXXXX (“X”

means the last 6 digits of the MAC address)

Default Wireless Encryption Type: None

STEP 1: The Web management allows you to access

and manage the Wireless AP easily. Launch

the Web browser and enter the default IP

address http://192.168.1.253

STEP 2: When the login window pops up, please enter

the User Name and Password. The default

User Name and Password are both “admin”.

Then click OK button to continue.

For security reasons it is recommended to change the

passwordattherstloginandmemorizeit.

STEP 2: Highlight the wireless network (SSID) to

connect and click [Connect] button.

STEP 3: Enter the encryption key of the WNAP-

W2200 if necessary.

You have already nished the conguration of the

WNAP-W2200. Now you can use your iPhone, iPad,

laptop, and any other Wi-Fi device to connect with it

wirelesslyandstartsurngtheinternet.

Further Information:

The above steps introduce simple installations and

congurations for the WNAP-W2200. For further

congurations of LAN, Wireless, Access Control, etc,

please refer to the user’s manual in the CD. If you

have further questions, please contact the local dealer

or distributor where you purchased this product.

2011-E10540-000

STEP 3: After you enter into the Web User

Interface, go to WLAN Settings to

congureyourwirelessnetwork.

For security reasons, strongly recommended

to congure the Encryption Method and

Passphrase of your wireless network.

STEP 4: Once the basic conguration of the WNAP-

W2200 is done, click “Save” button to

make the change effective.

6. Wireless Network Connection

STEP 1: Right-Click on the network icon displayed

in the system tray.