User Manual of WDAP-C7200AC
-28-
Subnet Mask Default is 255.255.255.0. You can change it according to your request.
Default Gateway Default is 192.168.1.253. You can change it according to your request.
DHCP You can select a Disabled, Client, and Server. Default is Disabled,
meaning the WDAP-C7200AC must connect to a router to assign IP
addresses to clients.
DHCP Client Range For the Server mode, you must enter the DHCP client IP address
range in the field. And you can click the “Show Client” button to show
the Active DHCP Client Table.
Static DHCP Click the “Set Static DHCP” button and you can reserve some IP
addresses for those network devices with the specified MAC
addresses anytime when they request IP addresses.
Domain Name Default is Planet.
802.1d Spanning Tree You can enable or disable the Spanning Tree function.
Clone MAC Address You can input an MAC address here for using clone function.
UPnP Enable You can enable or disable the UPnP function.
The UPnP feature allows the devices, such as Internet computers, to
access the local host resources or devices as needed. UPnP devices
can be automatically discovered by the UPnP service application on
the LAN.
If you change the IP address of LAN, you must use the new IP address to login the
AP.
When the IP address of the WDAP-C7200AC is changed, the clients on the
network often need to wait for a while or even reboot before they can access the
new IP address. For an immediate access to the AP, please flush the netbios
cache on the client computer by running the “nbtstat –r” command before using
the device name of the WDAP-C7200AC to access its Web Management page.
