14
DIP Switch
The front panel of the IGS-624HPT provides one 3-DIP Switch which is for
conguring 100 or 1000X ber support and ber redundant function.
Refer to the table below to know about the 3-DIP switch settings and descriptions:
For more information about the ber redundancy function, please refer to Chapter
2.1.7 Redundancy Overview.
1 2 3
OFF ON
Fiber Redundant (DIP 3) Switch Fiber Redundant
Port 6 (DIP 2) 1000X 100FX
Port 5 (DIP 1) 1000X 100FX
2.1.2 LED Indicators
System
LED Color Function
P1 Green Light: indicates power 1 has power.
P2 Green Light: indicates power 2 has power.
FAULT Green Light: indicates either power 1 or power 2 has no power.
10/100/1000BASE-T Interfaces
LED Color Function
LNK/ACT
Green
Light: indicates the Switch is successfully connecting to
the network at 1000Mbps.
Blink: indicates that the Switch is actively sending or
receiving data over that port.
Off: indicates that the Switch is inactively sending or
receiving data over that port.
Orange
Light: indicates the Switch is successfully connecting to
the network at 10Mbps or 100Mbps.
Blink: indicates that the Switch is actively sending or
receiving data over that port.
Off: indicates that the Switch is inactively sending or
receiving data over that port.
PoE in-Use
(Port 1~4)
Orange
Light: indicates the port is providing 52V DC in-line
power.
Off: indicates the connected device is not a PoE Powered
Device (PD).
