
Congure IP address
4. On “IGS-10020HPT: /IP>” prompt, enter the following command and press
<Enter>.AsshowinFigure6-2.
IGS-10020HPT:/IP>setup 192.168.1.100 255.255.255.0 192.168.1.1 1
ThepreviouscommandwouldapplythefollowsettingsfortheSwitch.
IP: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
VLAN ID: 1
Figure 6-2: Set IP address screen
5.RepeatStep1tocheckiftheIPaddressischanged.
If the IP is successfully congured, the Managed Industrial Switch will apply the
new IP address setting immediately. You can access the Web interface of IGS
ManagedIndustrialSwitchthroughthenewIPaddress.
Ifyoudonotfamiliar withconsolecommandortherelatedparam-
eter,enter“?”anytimeinconsoletogetthehelpdescription.