Firmware Update for the TX-8050
2
We are pleased to offer this firmware update for the best possible performance of your Stereo Receiver.
A firmware update is now available through the Network or USB connections on the TX-8050
To check if your firmware is the latest version, go in to Setup -> Hardware Setup -> Firmware Update and
check the 16 digit number. (xxxx-xxxx-xxxx-xxxx)
If any of the numbers differ from the latest version available, please update your unit.
Latest Firmware Version: 1041-1000-0000-0000
The 12/03/2013 update addresses the following:
1. Improves the playback stability of FLAC files via Network/USB
2. Corrects lock up failure when using Telstra T Box or MiCasaVerde Vera Lite controller on the same
network
The 08/06/2013 update addresses the following:
1. Corrects intermittent problems seen with Onkyo Remote App
The 7/5/2012 update addresses the following:
1. Stabilizes audio playback of iPod/iPhone via USB port
The 3/16/2012 update addresses the following:
1. Stabilizes video output when using HDMI/CAT5 Extender on HDMI OUT MAIN terminal
2. Change default maximum volume level(DMR Max Volume) in Web Setup Menu from 82 to 64;
Also changed configurable maximum volume level from 100 to 80; If current maximum volume level is set
over 80, it will automatically be set to 80 as maximum volume level after updating
The 12/16/2011 update addresses the following:
1. Supports Onkyo Remote App for Android version: 1.00 or later
*it is also necessary to update the App.
2. Adds support of Spotify control via Remote App for Android
The 11/16/2011 update addresses the following:
1. Improves the playback of AAC files from USB memory/DLNA server
The 09/14/2011 update addresses the following:
1. Stabilizes continuous playback from USB memory/DLNA server
